10 Easy Steps on How to Clean a Sheepskin Rug?

Sheepskin rugs are a beautiful and natural addition to any home. But like any rug, they need to be cleaned from time to time. Here are some tips on how to clean your sheepskin rug.

Natural sheepskin rugs are relatively easy to clean, but special cleaning techniques are needed to keep the wool fibres looking their best. To maintain the fibres elevated and free of mats, you’ll need to brush and shaking out the rug’s fibres in addition to washing (or dry cleaning) it.

To maintain your sheepskin rug clean and in brand-new condition, follow the instructions given in this article.

How to Clean a Sheepskin Rug

10 Easy Steps on How to Clean a Sheepskin Rug

It first relies on the kind of stain you have. It’s simpler to remove general organic stains like mud and non-acidic meals once they have dried, and these stains are quite simple to do so.

Acidic stains, on the other hand, including wine, vomit, and tomato sauce, can quickly enter wool and effectively colour it, making them harder to remove.

To maintain your sheepskin rug clean and in brand-new condition, follow the instructions given in this article. To make sure you get it right, follow these steps.

You’ll Need the following:

  • Wool wash
  • Vacuum
  • Flat Knife or Spoon
  • Large Tub or Sink
  • Gentle Detergent
  • Baking Soda
  • Spray Bottle
  • Cornstarch
  • Paper Towels
  • Hair Conditioner
  • Washing Machine
  • White Towels for Cleaning
  • Soft-bristled Brush, Dog Comb, or Wire Wool Comb
  • Towels Made of Thick Terry Cloth
  • Clothing line or a drying rack

Directions:

  • Shake and brush it
  • Vacuum the Rug
  • Quickly spot-clean stains
  • Use Baking Soda to Get Rid of Smells
  • Before washing, read the label with properly cared.
  • Make a cleaning solution
  • Submerge the Rug
  • Rinse and Dry
  • Restore Fibers using a Brush
See also  Best Toilet Seat For Heavy People

Let’s discuss the details of how to clean a sheepskin rug without damaging its fibres.

Shake it and Brush It

Regular brushing and shaking of the rug, preferably outside, will get rid of loose dirt and dust and bring back the bounce of the wool fibres. To lessen matting and restore lustre, brush the fibres with a wire wool comb or a dog comb.

Vacuum the Rug

A vacuum cleaner is the best tool for vacuuming a rug. To ensure that the vacuum cleans the entire area, you’ll need to have it at least four to six inches away from the rug. If your rug has been heavily used, you’ll need to vacuum it for about 15 minutes.

Vacuuming could be simpler for extremely large rugs and get rid of dirt and dust. Use just standard suction. Turbo and rotating brush heads can tangle hair because they are too rough on the fibres.

Quickly Spot Cleaning Stains

For this method, you’ll need some carpet cleaning tools such as a steam cleaner, a spot remover, and a damp cloth. If you want to make the stain go away, you should first remove the stain. You can use a damp cloth to do this.

You also like this article: How To Clean Cowhide Rugs?

Once the stain is removed, you should use a spot remover to get rid of the remaining residue. A steam cleaner will be necessary to get rid of any lingering odours.

Mud or Food Stains

According to the instructions on the product package, combine warm water and wool wash a sheepskin rug to create a solution. Blot the stain by dipping a white cloth in the solution. As the stain spreads, keep going to a spot on the material that is clean.

Avoid soaking the rug. If any soapy residue remains after removing the stain, wipe the area with a cloth dipped in plain water. After letting the rug air dry, use a comb to lift the strands.

See also  Best Hot Water Pressure Washer

Against Oily Stains

Cornstarch should be applied to the region to absorb the oil. After letting the cornstarch sit on the rug for a few hours, brush or vacuum it off. If necessary, repeat.

Use Baking Soda to Get Rid of Smells

Sprinkle dry baking soda liberally on the sheepskin if the rug smells less than fresh. It can be combed in or worked into the strands using your hands.

You also like this: How To Clean A Faux Fur Rug?

Give the baking soda at least two hours, preferably overnight, to sit on the rug. To get rid of the baking soda and lift the fibres, shake or vacuum the rug.

Before washing, Read The CareLabel

It is important to follow the manufacturer’s instructions carefully. Never put any wool products in a washing machine if they contain perfumes or scented products.

These products are harmful to the wool and the fabrics in the machine. Perfumes can cause staining to the wool, or they can even damage your washing machine.

Use a front-load washer or a top-load washer without a central agitator, cold water, wool wash, and the gentle cycle for the best results if you decide to machine-wash. Fibres can become matted and frizzled with excessive stimulation. Hand washing is the most secure way to clean a white sheepskin rug.

You may also like: How to Clean a Braided Rug?

Make a Cleaning Solution

At some point, the entire sheepskin rug will require washing. The right detergent must be used if you want to succeed. In order to help the fibres recover their natural softness after washing, many wool washes are infused with lanolin, a natural fat present in wool. Wool washes must be free of enzymes that could harm the fibres.

See also  5 Best Flooring Ideas for Florida Homes

As directed on the product label, combine the wool wash with warm water in a big tub.

Submerge the Rug

Soak the rug in the cleaning solution, and then for about 10 minutes, gently squeeze the soapy water into the fibres.

You may also like: Best Roof Coating For Ponding Water

Rinse and Dry

Fill the tub back up with brand-new, chilly water. Fresh water should be forced through the fibres. Once there are no longer any suds in the tub, drain it again.

Gently squeeze the extra water from the rug after the suds have been removed. Avoid twisting or wringing. Use multiple thick towels to remove as much water from the carpeting as you can.

To let the rug air dry, hang it from a reliable drying rack. A sheepskin rug should never be dried in a dryer, and wet fibres should never be brushed.

Restore Fibers using a Brush

Use a wire brush or comb to carefully untangle any matted fibres once the rug has dried completely. For usage with sheepskin products, the shampoo should be specially created. Once more, use a soft brush to fluff up the rug.

If necessary, you can take them to the dry cleaners or have them professionally dry-cleaned. In this case, prevention definitely is better than cure. The better you maintain your sheepskin rug, the less cleaning sheepskin it will require.

You may also like: Best time to water the lawn in Florida

Final Remarks

We hope now you have enough information on how to clean a sheepskin rug. In conclusion, cleaning a sheepskin rug is not a difficult task. By following the steps outlined in this article, you can easily keep your sheepskin rug clean and looking new.

A little effort and time spent on cleaning and maintenance will go a long way in preserving your sheepskin rug. Thank you for reading. We would love to hear from you soon!

      SelectMyBlog
      Logo
      Enable registration in settings - general