Last Updated on 2 months by William
Faux fur rugs are a beautiful and luxurious addition to any home. But, like any rug, they must be properly cared for to keep them looking their best.
They are also very easy to take care of and clean. Here are some tips on how to clean a faux fur rug.
When it comes to cleaning a faux fur rug, there are a few things you need to keep in mind. First, vacuum the rug regularly to remove any dirt or debris.
Second, if there are any stains on the rug, you should spot cleaning them with a mild detergent.
Third, you should avoid using harsh chemicals or cleaners on the rug. Fourth, you should avoid wetting the rug as this can damage the fibers. Let’s discuss it in detail!
How To Clean A Faux Fur Rug? (Steps)
Your living area or bedroom can benefit greatly from the addition of a good faux fur rug. Unfortunately, your rug may become covered in stains or smudges from regular use with time.
To avoid causing any damage to your rug when cleaning it, it’s crucial to understand the finest cleaning techniques.
To find the finest cleaning technique, we conducted research. The procedures for cleaning the rug are as follows:
- Vacuum or Shake the Rug
- Fill a Tub Halfway with Soapy Water
- Set the Rug in the Water to Soak
- Wash the Carpet with Warm Water
- The Rug Must Be Dried
The procedures for cleaning your faux fur rug will vary slightly based on the cleaning required, the type of material it is made of, and the maintenance recommendations.
Our main concern is to make you aware of how to clean a faux fur rug. Continue reading for the fundamental cleaning procedure measures for your faux fur rug.
5 Steps on Cleaning a Faux Fur Rug
For many faux fur rugs, dry cleaning is preferable to machine or hand washing to prevent knotting and tangling. Always check the care tag before washing your faux fur rug using the following techniques.
You could occasionally come across typical signs or tags that clearly state what you should do. Without any, there is a good probability that your faux fur rug can be washed in a washing machine.
Requisites for the cleaning procedures:
- Upright or Handheld Vacuums with Hose Attachments
- Sheepskin Detergent or Mild Laundry Detergent
- Cat Comb
- Baby Shampoo
- Baking Soda
- White Sponge Cleaning Cloth
Vacuum or Shake the Rug
The first step is to remove the rug from its bag and lay it flat. Once you have done this, you should vacuum the area where the rug is laid out. Make sure that you vacuum underneath it. You will want to ensure you are removing all the loose material and dust from the rug.
Simply vacuuming it with a handheld or upright vacuum with a hose attachment is one of the finest methods.
To keep the rug from getting tangled, be careful to move the vacuum over it in the grain direction.
Simply shaking the rug to remove any loose dirt, although it’s best to do this outside to prevent a mess inside your house.
Fill a Tub Halfway with Soapy Cold Water
Soapy water is good for washing rugs and carpets. Use a manageable bucket, tub, or sink for your job.
It is because the amount of water you will use will be quite a bit. You will need about 1/ 2 cup of liquid dishwashing detergent for every two square feet of carpeting you are trying to clean.
To get a good cleaning, you must fill the tub halfway with soapy water. A regular bathtub will be sufficient for this task. Make sure you use a plastic bucket or a stainless steel container if you use a sink.
Set the Rug in the Water to Soak
To remove any dirt and debris stuck in the rug’s fibers:
- Place the rug in the tub and gently agitate it with your hand.
- Avoid rubbing or wiping the rug in any manner because doing so could lead it to matte and gather knots.
- Depending on how dirty it is, let the rug soak in the water for 10 to 30 minutes after agitating it.
Wash the Carpet with Lukewarm Water
Drain the water from the tub or basin once you are confident that the carpeting is clean. Refill the tub with warm water and gently agitate the rug once more to remove all the soap and residue that have built up in its fibers.
Make sure to rinse the rug thoroughly without squeezing or wringing it out. Tightly roll the rug to help wring out any excess water.
The Rug Must Be Dried
The rug should be stretched out flat to dry after being rinsed. When placing the rug down, don’t stretch it too far. You can also hang it outside to dry on a clothesline in warm, sunny weather.
How Should Faux Fur Rugs Be Dried Properly?
When it comes to dry faux fur rugs, there are several dos and don’ts.
Do’s:
- The most dependable and secure method for drying fluffy rugs is air drying. A breezy day under the sun is ideal.
- The rug can easily be hung outside or on a rooftop using sturdy plastic hangers.
- To hasten the drying process, you might use a fan or a hairdryer in a cooler setting. Normally, it takes no longer than 48 hours in good sunshine.
Don’ts:
- Avoid drying the rug at a dry cleaner. It can harm hair, although some still use it without hot settings. And the texture of the fur rug can become harsh.
- Avoid shoving it against your will into the dryer.
- A heavy, wet rug should not be hung directly on a hanger or a wall since this will cause it to become distorted, and the weight of the water will only cause the fibers to point downward.
Final Remarks
We hope you enjoyed our “How to clean a faux fur rug” article. To sum up, properly cleaning a faux fur rug is important to keep it looking its best.
However, cleaning a faux fur rug is easier than it may seem. Following the simple steps outlined in this article, you can keep your rug looking new for years.
