245/45R18 vs 235/45R18 Tire Size Comparison & Fitment Guide

Chassis Dynamics, Handling & Braking Performance

Selecting 235/45R18 over 245/45R18 causes measurable shifts in suspension geometry, braking leverage, and rotational physics:

1. Sidewall Compliance & Ride Quality

The sidewall height variance is 0.18 inches (4.5 mm). The lower sidewall on 235/45R18 stiffens lateral tire deflection under high cornering loads, sharpening steering turn-in response and reducing transient body roll. Vertical impact absorption is firmer over pavement joints.

2. Contact Patch, Braking & Hydroplaning Resistance

With a cross-sectional width change of 10 mm, mechanical grip profiles change significantly. The narrower contact patch exerts higher ground contact pressure per square inch, slicing through standing water and slush more effectively to resist hydroplaning.

3. Rotational Mass, Gear Ratio & Fuel Efficiency (MPG)

The total diameter difference of -1.31% acts as a physical gearing modifier to the vehicle final drive ratio. A shorter tire produces a shorter effective gear ratio, delivering peppier throttle response while operating at marginally higher RPM during sustained highway cruising.

Wheel Well Fitment, Strut Clearance & Rim Guidelines

Before mounting 235/45R18 as a replacement for 245/45R18, inspect the following three clearance zones:

• Inner Suspension & Strut Clearance: Ensure at least 15 to 20 mm of space exists between the inner sidewall and the front strut spring perches when wheels turn to full lock.
• Outer Fender & Arch Clearance: Verify that under full suspension compression, the outer shoulder of the tire tucks cleanly inside the fender lips without scrubbing.
• Rim Width Range: Ensure your alloy wheel rim width matches the certified ETRTO and TRA rim width range for 235/45R18 tires.

Frequently Asked Questions